Description
Fiber optic tungsten halogen source for spectroscopy, 20W 360-2400nm
Engineering Specifications | HL-2000-HP Family |
Source: | High-powered Tungsten Halogen |
Wavelength Range: | 360-2400 nm |
Color temperature: | 3,000 K |
Nominal bulb power: | 20 W |
Typical output power: | See chart below |
Warm-up time:* | 10 minutes |
Source lifetime: | 1,000 hours (typical) |
Stability of optical output: | 0.25% peak-to-peak |
Drift of optical output: | <0.3% per hour |
Trigger/shutter input signal: | TTL; Up to 2.5 Hz maximum |
Trigger/shutter connection: | SUB-D-15 pin |
Integrated filter holder: | HL-2000-HP-FHSA only |
Operating temperature: | 5 °C – 35 °C |
Operating humidity: | 5-95% without condensation at 40 °C |
Power requirements: | 24 VDC |
Power consumption: | up to 30 W |
Dimensions: | 6.2 x 6 x 15 cm |
Weight: | 0.5 kg |
Safety & regulatory: | CE; ROHS, WEEE |
Replacement bulb: | HL-2000-HP-B |
Output Power
The table below reports typical output power coupled into a 600 μm UV/VIS fiber and measured with an optical power meter integrated from 200-1100 nm.
Model | Output |
HL-2000 | 6.8 mW |
HL-2000-FHSA | 6.7 mW |
HL-2000-LL | 4.7 mW |
HL-2000-FHSA-LL | 4.5 mW |
HL-2000-HP | 8.8 mW |
HL-2000-HP-FHSA | 8.4 mW |
HL-2000-HP-232-R | 8.4 mW |
Shutter/Trigger Options
Engineering Specifications | HL-2000-FHSA | HL-2000-FHSA-LL | HL-2000-HP-FHSA | HL-2000-HP-232R |
Trigger/shutter input signal: | TTL; Up to 2.5 Hz maximum | TTL; Up to 2.5 Hz maximum | TTL; Up to 2.5 Hz maximum | TTL; Up to 1.0 Hz maximum |
Trigger/shutter connection: | SUB-D-15 pin | SUB-D-15 pin | SUB-D-15 pin | SUB-D-15 pin |
Available only for the listed models
Reviews
There are no reviews yet.