3-3.30 Quartz Fluorometer micro square cells
This range of Micro Fluorometer cells has been specifically designed by Starna for use with the FCA range of adapters listed below. The adapter locates the square cross section cell accurately in the center of the instrument cell compartment. Therefore, for a given path length, the cell is optimized for minimum volume and maximum sensitivity. All four windows and the base of the cells are polished and are available with either an open top or with a PTFE stopper supplied with the type 23- cells. The FCA adapters have exterior dimensions of a standard fluorometer cell (12.5mm x 12.5mm) and interior dimensions to accommodate the square micro fluorometer cells listed. Apertures are machined into the adapter wall to allow for transmission of the excitation and emission energy at either 8.5 or 15mm ‘Z’ dimension. The aluminum adapters are black anodized to eliminate stray light.
|Description:||Square Micro Fluorometer Cell, open top|
|Physical Configuration:||Square interior and exterior, open top, no closure|
|Primary use:||Fluorometer measurement in range as listed, typical useable volume between 0.225 and 0.875ml depending on cell size and instrument used.|
|Clear windows:||Four, with polished base|
|Instrument:||For use with fluorometers|
|Pathlengths available:||3, 4, 5mm|
|Most commonly used path length:||dependent on customer preference|
|Cell top:||Open top, no closure available|
|Window material Spectrosil Quartz or equivalent, useable range: 170 to 2700nm.|
We carry hundreds of cells, send an e-mail telling us what you need and we’ll find it for you.
|Dimensions||4 × 4 × 2 in|
3 mm, 4 mm, 5 mm